Velkommen til ITFON, EL-Salg Vordingborg

Filament SUNLU Højhastighedsmatte PETG (rødt)

Sunlu

EAN: 6933582315313

SKU: PETG H-S M R

Lagerstatus
På lager online
Forventet levering
Vejl. udsalgspris 179,00 kr
inkl. moms Levering beregnes ved kassen.
Beskrivelse

SUNLU High-Speed Matte PETG Filament (red)


SUNLU High-Speed Matte PETG is a 3D printing filament that allows you to print at speeds ranging from 50 to as high as 600 mm/s while maintaining smooth extrusion and good surface quality. The increased fluidity of the molten material ensures smooth filament feeding during high-speed printing, while good layer adhesion and a design that minimizes the risk of nozzle clogging contribute to stable operation. The matte, low-gloss surface reduces reflections and gives models an aesthetic finish, making the material suitable for both functional and decorative prints. The filament diameter is 1.75 ±0.02 mm, and each spool contains 1 kg of material, approximately 330 m in length.



Red printing filament wound on a dark gray spool.

Up to 600 mm/s and a smooth, matte finish


High-Speed Matte PETG can be used at various print speeds—for 50–100 mm/s, the recommended nozzle temperature is 205–215°C; for 100–300 mm/s, it is 240–250°C; and for 300–600 mm/s, 260–270°C should be used. The material combines high printing speeds with good strength, flexibility, and resistance to impact, wear, and various chemicals, making it suitable for prototypes, functional parts, mechanical designs, and DIY projects, among other applications. The tensile strength is 48 MPa, the flexural strength is 78 MPa, and the elongation at break is 33%, which allows for the creation of durable models with good layer adhesion.



Colored filament spools along with printed decorative and mechanical parts on a desk.

Optimal Conditions for Stable Printing


The recommended bed temperature is 60–70°C; at 70–80°C, no adhesive is required; however, if using an unheated platform, adhesive must be applied. Due to its increased fluidity, PETG is more susceptible to moisture, which can cause stringing, material leakage, and a deterioration in print quality; therefore, the filament must be thoroughly dried before printing and protected from moisture during long print runs. The recommended humidity during storage and printing is below 20% RH when stored in an airtight container with a desiccant, and the drying setting is 50°C; for SUNLU S4/E2 dryers, 65°C for at least 8 hours is recommended.



A set of colored filament spools and finished printed objects of various shapes.



 







Manufacturer SUNLU
Name High-Speed Matte PETG
Color Red
Material PETG
Filament Diameter 1.75 ±0.02 mm
Print Speed 50–600 mm/s
Nozzle temperature for 50–100 mm/s 205–215°C
Nozzle temperature for 100–300 mm/s 240–250°C
Nozzle temperature for 300–600 mm/s 260–270°C
Bed temperature 60–70°C
Bed temperature without adhesive 70–80°C
Recommended humidity <20% RH
Drying temperature 50°C
Recommended drying in SUNLU S4/E2 65°C for at least 8 hours
Density 1.26 g/cm³
Heat deflection temperature 70°C
Melting point 128°C
Melt flow rate 4.4 g/10 min
Tensile strength 48 MPa
Elongation at break 33%
Flexural strength 78 MPa
Flexural modulus 2700 MPa
IZOD impact strength (X-Y notch) 4.1 kJ/m²
Net weight 1 kg
Gross weight 1.3 kg
Filament length Approximately 330 m

Produktdata er baseret på producentoplysninger og eksterne kilder. ITFON kan ikke holdes ansvarlig for eventuelle fejl eller unøjagtigheder.

Scansonic PA8001 DAB+ radio med trådløs oplader

Køb din i dag

Scansonic PA8001 DAB+ radio med trådløs oplader

ITFON, siden 2015.

Her finder du alt fra hvidevarer til pc'er – og vi har endda vores eget værksted til reparationer. Vores IT-specialiserede værksted har over 10 års erfaring med mobiltelefoner, tablets og computere