Sunlu S4 Filament Tørrer
Sunlu S4 Filament Tørrer .
Betalingsmetoder
Betalingsmetoder
Vi tilbyder flere sikre betalingsmuligheder, så du nemt kan vælge den, der passer dig bedst:
✔ MobilePay – Betal hurtigt og sikkert med din mobil.
✔ Kreditkort – Vi accepterer VISA, Mastercard og Dankort.
✔ ViaBill – Køb nu, betal senere med fleksible afbetalingsmuligheder.
Levering eller afhentning
Levering eller afhentning
Bestil nemt – vælg levering eller afhentning i Vordingborg
Køb dit produkt hos os og vælg den leveringsmetode, der passer dig bedst:
🚚 Hurtig levering – Få din ordre leveret direkte til din adresse eller nærmeste pakkeshop. Vi samarbejder med pålidelige fragtfirmaer for sikker og hurtig levering.
📍 Lokal afhentning i Vordingborg – Ønsker du at spare fragttiden? Vælg lokal afhentning, og hent din ordre direkte hos os i Vordingborg. Vi sender en besked, så snart din vare er klar til afhentning.
Uanset om du vælger levering eller afhentning, sørger vi for en nem og problemfri shoppingoplevelse.
14 dages returret
14 dages returret
Klik her for hurtigt at bestille en returlabel
Nem og enkel retur inden for 14 dage
Vi ønsker, at du skal være tilfreds med dit køb. Hvis du fortryder dit køb, har du mulighed for at returnere din vare inden for 14 dage efter modtagelse.
For at varen kan returneres, skal den være i samme stand som ved modtagelsen – ubrugt, med eventuelle mærker påsat og i original emballage.
Kontakt os, hvis du ønsker at starte en returnering, så guider vi dig gennem processen. Vi gør det nemt og problemfrit for dig.
Sunlu S4 Filament Tørrer
Sunlu S4 Filament Tørrer
Betaling og Sikkerhed
Betalingmetoder
Dine betalingsoplysninger behandles sikkert. Vi gemmer ikke kreditkortoplysninger og har heller ikke adgang til dine kreditkortoplysninger.
Beskrivelse
Beskrivelse
Sunlu S4 Filament Dryer
The SUNLU FilaDryer S4 is an advanced filament dryer designed for demanding 3D printing users. It offers a massive capacity—drying up to 4 spools (1 kg each) simultaneously—and the ability to work with multiple printers at once. With a power output of 320–330 W, rapid heating (up to 50°C in just 30 minutes), and a maximum temperature of 70°C, the device ensures effective and uniform drying of even the most demanding materials, such as PA or PC. The built-in humidity control system, touchscreen, 8 filament outputs, and predefined material profiles make using the device not only effective but also extremely convenient.
Dry up to 4 filaments simultaneously – maximum productivity
Thanks to the large chamber (450 × 210 × 211 mm), you can dry up to four spools of filament at the same time. This is the perfect solution for multicolor printing or working with multiple printers simultaneously. You don’t waste time changing materials—everything is ready in one place, which significantly speeds up and streamlines the entire process.
Instant heating and high power – efficiency that makes a difference
Performance is ensured by a PTC heater with a power of up to 330 W, which allows it to reach 50°C in about 30 minutes and a maximum of 70°C. This means shorter filament preparation time and greater drying efficiency. Even difficult, hygroscopic materials regain their properties faster than ever before.
Ideal temperature balance – perfect drying for every spool
A three-fan system (on the sides and bottom) ensures even air circulation and temperature stability within ±3°C. This ensures that every section of the filament is dried evenly, resulting in better print quality, greater consistency, and no surprises during operation.
Smart humidity control – filament always in perfect condition
An advanced humidity control system automatically starts drying when the humidity level exceeds the set range (30–50%) and stops the process once optimal conditions are reached (approx. 25%). This means full automation and the assurance that the filament is always ready for use—without manual monitoring.
Safety and ease of use – technology you can rely on
The SUNLU S4 is equipped with a triple safety system: a PTC heater, a temperature sensor, and software protection. The device monitors temperature in real time and alerts you to any abnormalities, ensuring safe operation. Additionally, the touchscreen and pre-set profiles for PLA, ABS, PETG, TPU, PA, and PC simplify operation and eliminate the guesswork involved in settings.
Full compatibility and flexibility – tailor the equipment to your needs
Support for filaments with diameters of 1.75 mm, 2.85 mm, and 3.00 mm, along with compatibility with most 3D printers, ensures the SUNLU S4 performs well in any environment. Eight filament outputs and the ability to connect multiple printers simultaneously allow for flexible workstation configuration. This device truly expands your capabilities and lets you create without limits.
Included:
- SUNLU S4 Filament Dryer
- Power cord
- PTFE tubes
- User manual
| Manufacturer | Sunlu |
|---|---|
| Model | Fila Dryer S4 |
| Rated power | 320–330 W |
| Power supply | AC 100–240 V / 50–60 Hz |
| Maximum temperature | 70°C |
| Heating time to 50°C | approx. 30 minutes |
| Capacity | 4 spools (1 kg each) |
| Internal dimensions | 450 × 210 × 211 mm |
| Device dimensions | 516 × 278 × 350 mm |
| Net weight | 4.8 kg |
| Gross weight | 5.5 kg |
| Heating system | PTC + 3 fans |
| Temperature stability | ±3°C |
| Humidity control | Automatic (start 30–50%, stop approx. 25%) |
| Supported materials | PLA, ABS, PETG, TPU, PA, PC |
| Supported filament diameters | 1.75 mm / 2.85 mm / 3.00 mm |
| Number of filament outlets | 8 (can be used with PTFE tubes) |
| Display | Touchscreen LCD |
Scansonic PA8001 DAB+ radio med trådløs oplader
Køb din i dag
Gå til:
