{"product_id":"filament-sunlu-hojhastighedsmatte-petg-rodt","title":"Filament SUNLU Højhastighedsmatte PETG (rødt)","description":"\u003cp\u003e      \u003c\/p\u003e\u003ch3\u003eSUNLU High-Speed Matte PETG Filament (red)\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eSUNLU High-Speed Matte PETG is a 3D printing filament that allows you to print at speeds ranging from 50 to as high as 600 mm\/s while maintaining smooth extrusion and good surface quality. The increased fluidity of the molten material ensures smooth filament feeding during high-speed printing, while good layer adhesion and a design that minimizes the risk of nozzle clogging contribute to stable operation. The matte, low-gloss surface reduces reflections and gives models an aesthetic finish, making the material suitable for both functional and decorative prints. The filament diameter is 1.75 ±0.02 mm, and each spool contains 1 kg of material, approximately 330 m in length.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Red printing filament wound on a dark gray spool.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24644\/32386\/4-1b29167d-70d6-4174-bf03-70e2e33dadfc.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eUp to 600 mm\/s and a smooth, matte finish\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eHigh-Speed Matte PETG can be used at various print speeds—for 50–100 mm\/s, the recommended nozzle temperature is 205–215°C; for 100–300 mm\/s, it is 240–250°C; and for 300–600 mm\/s, 260–270°C should be used. The material combines high printing speeds with good strength, flexibility, and resistance to impact, wear, and various chemicals, making it suitable for prototypes, functional parts, mechanical designs, and DIY projects, among other applications. The tensile strength is 48 MPa, the flexural strength is 78 MPa, and the elongation at break is 33%, which allows for the creation of durable models with good layer adhesion.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Colored filament spools along with printed decorative and mechanical parts on a desk.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24644\/32386\/7-0f033958-0b75-4ff8-999d-cce17430f9b3.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eOptimal Conditions for Stable Printing\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe recommended bed temperature is 60–70°C; at 70–80°C, no adhesive is required; however, if using an unheated platform, adhesive must be applied. Due to its increased fluidity, PETG is more susceptible to moisture, which can cause stringing, material leakage, and a deterioration in print quality; therefore, the filament must be thoroughly dried before printing and protected from moisture during long print runs. The recommended humidity during storage and printing is below 20% RH when stored in an airtight container with a desiccant, and the drying setting is 50°C; for SUNLU S4\/E2 dryers, 65°C for at least 8 hours is recommended.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"A set of colored filament spools and finished printed objects of various shapes.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24644\/32386\/8-a4919a56-9dfe-415a-8d85-aebe5234ede0.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv class=\"table-wrapper\"\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003ch3\u003e\u003c\/h3\u003e\n\u003cbr\u003e\u003ctable\u003e\n\u003cbr\u003e\u003ctbody\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eSUNLU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003ctd\u003eHigh-Speed Matte PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament Diameter\u003c\/th\u003e\n\u003ctd\u003e1.75 ±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrint Speed\u003c\/th\u003e\n\u003ctd\u003e50–600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle temperature for 50–100 mm\/s\u003c\/th\u003e\n\u003ctd\u003e205–215°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle temperature for 100–300 mm\/s\u003c\/th\u003e\n\u003ctd\u003e240–250°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle temperature for 300–600 mm\/s\u003c\/th\u003e\n\u003ctd\u003e260–270°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60–70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature without adhesive\u003c\/th\u003e\n\u003ctd\u003e70–80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended humidity\u003c\/th\u003e\n\u003ctd\u003e\u0026lt;20% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying temperature\u003c\/th\u003e\n\u003ctd\u003e50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended drying in SUNLU S4\/E2\u003c\/th\u003e\n\u003ctd\u003e65°C for at least 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.26 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat deflection temperature\u003c\/th\u003e\n\u003ctd\u003e70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMelting point\u003c\/th\u003e\n\u003ctd\u003e128°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMelt flow rate\u003c\/th\u003e\n\u003ctd\u003e4.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e48 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e33%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e78 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2700 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIZOD impact strength (X-Y notch)\u003c\/th\u003e\n\u003ctd\u003e4.1 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight\u003c\/th\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGross weight\u003c\/th\u003e\n\u003ctd\u003e1.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament length\u003c\/th\u003e\n\u003ctd\u003eApproximately 330 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/div\u003e  ","brand":"Sunlu","offers":[{"title":"Default Title","offer_id":55005113876808,"sku":"6933582315313","price":179.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0509\/0361\/3640\/files\/64178_1_1.webp?v=1795131304","url":"https:\/\/itfon.dk\/products\/filament-sunlu-hojhastighedsmatte-petg-rodt","provider":"ITFON, EL-SALG Vordingborg","version":"1.0","type":"link"}