{"product_id":"anycubic-kobra-s1-ace-2-pro-combo-3d-printer","title":"ANYCUBIC Kobra S1 ACE 2 Pro Combo 3D-printer","description":"\u003cp\u003e      \u003c\/p\u003e\u003ch3\u003eANYCUBIC Kobra S1 ACE 2 Pro Combo 3D Printer\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe ANYCUBIC Kobra S1 ACE 2 Pro Combo is an advanced FDM 3D printer featuring a closed CoreXY design, a 250 × 250 × 250 mm build volume, and the ACE 2 Pro multicolor printing system. The device achieves print speeds of up to 600 mm\/s with a maximum acceleration of 20,000 mm\/s², and thanks to a hotend capable of temperatures up to 320°C and a heated bed up to 120°C, it supports a wide range of filaments, including PLA, PETG, ABS, ASA, and TPU. The ACE 2 Pro module enables 4-color printing with the option to expand the system to 16 colors, and additionally functions as an active filament dryer with a temperature of up to 65°C. LeviQ 3.0 automatic leveling, intelligent print monitoring, remote control via the app, and quiet operation make the device ideal for both home workshops and professional design environments.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Anycubic Kobra S1 printer with a multi-color filament feed module mounted on top\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/9.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eMulticolor printing with the ACE 2 Pro module\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe included ACE 2 Pro module enables automatic four-color printing without the need for manual filament changes. This solution significantly simplifies the creation of more advanced projects, decorative models, figurines, or prototypes requiring the use of different material colors. The system can be expanded to support up to 16 colors by using additional ACE 2 Pro modules. However, it is important to note that simultaneous operation of first- and second-generation multicolor systems is not currently supported, so older Anycubic solutions cannot be combined with the new multicolor platform.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Anycubic ACE Pro module with four filament spools visible through the transparent housing\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/1.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eStable CoreXY design and high print quality\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe enclosed CoreXY design is engineered to maintain high precision even during very high-speed printing. The rigid frame minimizes vibrations, resulting in more accurate detail reproduction and a smoother surface finish on models. The enclosed build chamber helps maintain stable temperature conditions when working with more demanding materials, such as ABS or ASA. As a result, prints are less prone to warping, and the printing process is more predictable.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Anycubic 3D printer printing a house model, surrounded by four filament feed modules\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/2.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003ePerformance Designed for Rapid Prototyping\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe ANYCUBIC Kobra S1 is equipped with a high-performance drive system capable of achieving print speeds of up to 600 mm\/s and accelerations of up to 20,000 mm\/s². These parameters allow for a significant reduction in project turnaround time without compromising on build quality. The recommended operating speed is 300 mm\/s, which ensures an optimal balance between speed and precision. This is particularly important for users who regularly produce prototypes, functional models, or short production runs.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Close-up of a filament spool inside the transparent housing of the Anycubic ACE Pro module\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/4.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eCompatibility with popular filaments\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe printer is compatible with many materials used in FDM technology, including PLA, PETG, ABS, ASA, and TPU. This allows you to match the filament to the requirements of a specific project—from decorative models to technical parts designed for use in demanding conditions. A hotend reaching 320°C and a heated bed up to 120°C ensure the right working conditions for a wide range of materials. However, please note that due to its flexibility, TPU filament must be fed directly into the printer and is not compatible with the ACE 2 Pro module during automatic multicolor printing.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Top view of four filament spools in different colors and material feed guides\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/5.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eFilament Drying and Humidity Control\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe ACE 2 Pro module also functions as a smart filament dryer. The system allows the material to be dried at temperatures up to 65°C even during printing, which helps minimize issues caused by moisture in the material. Built-in temperature and humidity sensors monitor conditions inside the chamber in real time. Additionally, an active moisture removal system helps maintain proper filament storage conditions, resulting in more consistent results.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Several Anycubic 3D printers with a multi-color filament feeding system\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/6.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eSmart printing assistance features\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe Kobra S1 ACE 2 Pro Combo is equipped with LeviQ 3.0 automatic leveling, which eliminates the need for manual calibration of the build plate. The resonance compensation system uses a built-in accelerometer to reduce vibrations that affect the surface quality of models. The material flow correction feature allows for more precise control of extrusion, reducing excess material in corners and improving the dimensional accuracy of prints. These solutions help achieve better results with fewer manual adjustments.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Graphic showing the four assigned filament colors and a diagram of the automatic spool feeding mechanism\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/7.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eMonitoring and Operational Safety\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe printer offers a range of features that enhance safety and control over the printing process. The AI Monitoring system can detect anomalies such as the formation of so-called “spaghetti,” or uncontrolled material buildup during printing. The device also supports foreign object detection in the work area, drive belt tension monitoring, and automatic resume after a power outage. This allows the user to respond more quickly to potential problems and reduce the risk of failed prints.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Transparent model of the ACE Pro module housing with the internal airflow highlighted\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/8.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eUser Comfort and Remote Control\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eThe manufacturer has also prioritized the convenience of daily use. An intuitive 4.3-inch touchscreen simplifies operation, and the Anycubic App allows you to remotely start prints, monitor their progress, and view time-lapse recordings of the model-building process. The Anycubic Slicer Next software, based on the Orca Slicer platform, allows for convenient project preparation and the use of modern model slicing algorithms. Thanks to Wi-Fi connectivity, the printer can also be managed via a local network.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Diagram of the device’s interior showing four filament tubes leading to a common feed mechanism\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/3.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eQuiet operation and durable components\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eDespite its high performance, the device maintains a low noise level. In Quiet mode, it generates noise at approximately 44 dB, while in Standard mode, approximately 46 dB. When using the active filament drying function in the ACE 2 Pro module, the noise level may increase to approximately 55 dB, which is due to the operation of additional components responsible for drying the material. The use of brushless motors with a lifespan exceeding 5,000 hours supports long-term and stable operation of the device.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Cross-section of the 3D printer showing the direction of cooling airflow inside the chamber\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/10.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\u003cbr\u003e\u003cp\u003eBefore purchasing, it is worth considering the space needed for comfortable installation of the kit. The printer itself measures 400 × 410 × 490 mm and weighs approximately 18 kg. The ACE 2 Pro module measures 368 × 291.5 × 236.5 mm and weighs approximately 3.7 kg. Once set up, the entire kit occupies a workspace of approximately 420 × 530 × 710 mm, which is worth considering when planning your workstation.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"Diagram of the 3D printer’s structure with the print head’s guide rails and movement axes highlighted\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/22389\/29433\/13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eIncluded in the kit\u003c\/h3\u003e\u003cbr\u003e\u003cul class=\"list-disc pl-5\"\u003e\n\u003cli\u003eAnycubic Kobra S1 3D printer\u003c\/li\u003e\n\u003cli\u003eACE 2 Pro multi-color module\u003c\/li\u003e\n\u003cli\u003eSpool holder\u003c\/li\u003e\n\u003cli\u003eSignal cable\u003c\/li\u003e\n\u003cli\u003eFilament guide tubes x 4\u003c\/li\u003e\n\u003cli\u003ePower cables x 2\u003c\/li\u003e\n\u003cli\u003eSet of M2.5 x 25 screws (2 pcs.)\u003c\/li\u003e\n\u003cli\u003eSet of M3 x 6 screws (2 pcs.)\u003c\/li\u003e\n\u003cli\u003eAllen wrenches 1.5 \/ 2.0 \/ 2.5 mm\u003c\/li\u003e\n\u003cli\u003eFilament sample\u003c\/li\u003e\n\u003cli\u003eActivated carbon filter\u003c\/li\u003e\n\u003cli\u003eNozzle clog prevention module\u003c\/li\u003e\n\u003cli\u003eNozzle cleaning module\u003c\/li\u003e\n\u003cli\u003eSilicone nozzle cover\u003c\/li\u003e\n\u003cli\u003eNozzle cleaner\u003c\/li\u003e\n\u003cli\u003eCable organizers x 2\u003c\/li\u003e\n\u003cli\u003eLubricant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv class=\"table-wrapper\"\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003ch3\u003e\u003c\/h3\u003e\n\u003cbr\u003e\u003ctable\u003e\n\u003cbr\u003e\u003ctbody\u003e\n\u003cbr\u003e\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eKobra S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModule\u003c\/th\u003e\n\u003ctd\u003eACE 2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting technology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eEnclosed CoreXY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild volume\u003c\/th\u003e\n\u003ctd\u003e250 × 250 × 250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum print speed\u003c\/th\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended print speed\u003c\/th\u003e\n\u003ctd\u003e300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum acceleration\u003c\/th\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003eup to 320°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003eup to 120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported nozzles\u003c\/th\u003e\n\u003ctd\u003e0.2 \/ 0.4 \/ 0.6 \/ 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayer thickness\u003c\/th\u003e\n\u003ctd\u003e0.08–0.28 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAutomatic leveling\u003c\/th\u003e\n\u003ctd\u003eLeviQ 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported filaments\u003c\/th\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, TPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament drying\u003c\/th\u003e\n\u003ctd\u003eYes, up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMulticolor printing\u003c\/th\u003e\n\u003ctd\u003e4 colors (expandable to 16 colors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003e2.4 GHz Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSoftware\u003c\/th\u003e\n\u003ctd\u003eAnycubic Slicer Next, Orca Slicer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFile formats\u003c\/th\u003e\n\u003ctd\u003eSTL, OBJ, 3MF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e44 dB (Quiet), 46 dB (Standard), up to 55 dB during drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter dimensions\u003c\/th\u003e\n\u003ctd\u003e400 × 410 × 490 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter weight\u003c\/th\u003e\n\u003ctd\u003e18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eACE 2 Pro dimensions\u003c\/th\u003e\n\u003ctd\u003e368 × 291.5 × 236.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eACE 2 Pro weight\u003c\/th\u003e\n\u003ctd\u003e3.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired workspace\u003c\/th\u003e\n\u003ctd\u003e420 × 530 × 710 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/div\u003e  ","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":53943585964360,"sku":"6974662353887","price":7479.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0509\/0361\/3640\/files\/61902_1.jpg?v=1788215710","url":"https:\/\/itfon.dk\/products\/anycubic-kobra-s1-ace-2-pro-combo-3d-printer","provider":"ITFON, EL-SALG Vordingborg","version":"1.0","type":"link"}